Couplings

FLEXIDENT Couplings

FLEXIDENT Senior S

Type S  – Horizontal working position

  • Nominal Torque: 1 200 up to 302 450Nm

  • Max bore: 50 up to 280mm

THE FLEXIDENT ALL STEEL COUPLINGS,
machined with precision comprise two flanged sleeves with internal spur gear teeth. They are linkd by a set of heat treated alloy steel fasteners and mesh with two accurately machined crowned teeths hubs, with a carefully studied profile and minimum float to obtain the best alignmants.

 

4 Reasons to choose FLEXIDENT SENIOR

  • High standards

    Flexident Senior is a 100% steel coupling, manufactured with accuracy by CMD. Its components include two internally geared half covers, which are tightened together with a set of treated bolts. The half covers are then assembled onto twi geared hubs. The teeth of the hubs and covers receive shape corrections, which are calculated and optimized by CMD to obtain maximum contact surface under load, and to allow the highest misalignment capacity.

  • Reliability

Flexident Senior couplings were designed by the CMD engineering department. Their specification was checked by the most elaborate finite elements software, and was further validated by the CMD running bench test.

  • Reactivity & short delivery time

    Flexident Senior couplings are manufactured in serial production spare parts are sticked in the CMD, FCMD and CMD distributors warehouses wich are present all over the world.

  • Quality of Service

 

CMD and FCMD has built an ISO 9001 organization inside the company, which reflects CMD’s will to answer all questions from the customers:

Technical: CMD technicans and engineers can help you in selecting a standard CMD coupling or designing a specific coupling for your application. CMD design appartment is equipped with the latest CAD and finite elements software in order to calidate new designs.
Validation: CMD test bench allows to run and test the behaviour and reliability of existing couplings or new developments. It allows to apply different load and misalignment conditions to these couplings.
Sale: A wide and worldwide network of distributors hold a stock of couplings and can assist you in the selection of the proper one. They ae further supported everyday by CMD sales engineers.

Please click here to open our Flexident Senior Operating and Maintenance Manual.

Please click here to open our Flexident Senior catalogue.

FLEXIDENT S BM 

  • Nominal torque: 1 200 to 4 950 000 Nm

  • Bore: 50 to 800 mm

  • Special toothing with large radius for increased contact surface and low surface pressure

  • Optimized noise and vibration behaviour through tooth tip correction

  • Housing gearing: FEM-optimized spur gearing

  • Sealed by standard toroidal sealing ring. A secure seal guarantees the long life of the coupling

  • Writing in quality class 12.9 enable frictionally engaged torque transmission

FLEXIDENT S DB 

  • Nominal torque: 1 200 to 138 000 Nm

  • Drill hole: 50 to 250 mm

  • Special toothing with large radius for increased contact surface and low surface pressure

  • Optimized noise and vibration behaviour through tooth tip correction

  • Housing gearing: FEM-optimized spur gearing

  • Sealed by standard toroidal sealing ring. A secure seal guarantees the long life of the coupling

  • Writing in quality class 12.9 enable frictionally engaged torque transmission

FLEXIDENT S DF

  • Nominal torque: 3 000 to 43 000 Nm

  • Drill hole: 68 to 170 mm

  • Special toothing with large radius for increased contact surface and low surface pressure

  • Optimized noise and vibration behaviour through tooth tip correction

  • Housing gearing: FEM-optimized spur gearing

  • Sealed by standard toroidal sealing ring. A secure seal guarantees the long life of the coupling

  • Writing in quality class 12.9 enable frictionally engaged torque transmission

FLEXIDENT S DFC

  • Nominal torque: 1 200 to 190 000 Nm

  • Bore: 50 to 280 mm

  • Special toothing with large radius for increased contact surface and low surface pressure

  • Optimized noise and vibration behaviour through tooth tip correction

  • Housing gearing: FEM-optimized spur gearing

  • Sealed by standard toroidal sealing ring. A secure seal guarantees the long life of the coupling

  • Writing in quality class 12.9 enable frictionally engaged torque transmission

FLEXIDENT S E

  • Nominal torque: 255 000 to 4 950 000 Nm

  • Bore: 310 to 800 mm

  • Special toothing with large radius for increased contact surface and low surface pressure

  • Optimized noise and vibration behaviour through tooth tip correction

  • Housing gearing: FEM-optimized spur gearing

  • Sealed by standard toroidal sealing ring. A secure seal guarantees the long life of the coupling

  • Washers in quality 12.9 enable frictionally engaged torque transmission

FLEXIDENT S JL

  • Nominal torque: 1 200 to 190 000 Nm

  • Bore: 50 to 280 mm

  • Special toothing with large radius for increased contact surface and low surface pressure

  • Optimized noise and vibration behaviour through tooth tip correction

  • Housing gearing: FEM-optimized spur gearing

  • Sealed by standard toroidal sealing ring. A secure seal guarantees the long life of the coupling

  • Writing in quality class 12.9 enable frictionally engaged torque transmission

FLEXIDENT S PA

  • Nominal torque: 1 200 to 4 950 000 Nm

  • Bore: 50 to 800 mm

  • Special toothing with large radius for increased contact surface and low surface pressure

  • Optimized noise and vibration behaviour through tooth tip correction

  • Housing gearing: FEM-optimized spur gearing

  • Sealed by standard toroidal sealing ring. A secure seal guarantees the long life of the coupling

  • Writing in quality class 12.9 enable frictionally engaged torque transmission

FLEXIDENT S R

  • Nominal torque: 1 855 to 302 450 Nm

  • Bore: 50 to 280 mm

  • Special toothing with large radius for increased contact surface and low surface pressure

  • Optimized noise and vibration behaviour through tooth tip correction

  • Housing gearing: FEM-optimized spur gearing

  • Sealed by standard toroidal sealing ring. A secure seal guarantees the long life of the coupling

  • Writing in quality class 12.9 enable frictionally engaged torque transmission

FLEXIDENT S V

  • Nominal torque: 1 200 to 4 950 000 Nm

  • Bore: 50 to 280 mm

  • Special toothing with large radius for increased contact surface and low surface pressure

  • Optimized noise and vibration behaviour through tooth tip correction

  • Housing gearing: FEM-optimized spur gearing

  • Sealed by standard toroidal sealing ring. A secure seal guarantees the long life of the coupling

  • Writing in quality class 12.9 enable frictionally engaged torque transmission

FLEXIDENT Junior

 

Nominal torque 70 to 4 150 Nm
Bore: 42 to 180 mm

FLEXIDENT JUNIOR couplings are all-steel couplings manufactured with great precision. They consist of two halves of the housing with straight internal teeth, which are connected by tempered screws. Two coupling hubs with crowned involute splines, curved in the tooth head and tooth root, engage in the coupling halves. The profile is carefully designed with a minimum clearance and allows the compensation of misalignments.

Flexident J - The "economical" series with high quality and performance.
For sealing, the sealing rings are fitted at the ends of the housing halves.

The couplings have metric dimensions and threaded connections. They are interchangeable with coupling halves that comply with standard 516-01 for external screw connections.

Please click here to open our Flexident Junior catalogue.

FLEXIDENT Z

The couplings comply with the French steelworks standard, with module and number of teeth optimised to guarantee reliability, robustness and a large location hole. The pre-set covers, fitted with seals, guarantee reliable sealing of the lubricant inside the coupling housing.

Please click here to open our Flexident Z catalogue.

WINFLEX Couplings

WINFLEX T / TL / TL2

  • Nominal torque: 90 to 160 000 Nm

  • Bore: 28 to 270 mm

  • The WINFLEX coupling is equipped with an optimized spring:

  • exchangeable with the previous coupling hubs.

  • its exact geometry ensures a good distribution on each tooth of the coupling hub.

  • the spring material is chrome-vandium steel.

  • new surface treatment reduces friction.

The new spring significantly improves the previous design of the WINFLEX coupling, it is capable of transmitting the same torque at lower speeds.

  •  

  • easy to install.

  • durable.

  • resistant to changing environmental conditions (temperature, humidity, rough conditions).

  • reinforced protection against oxidation.

Please click here to open our WINFLEX catalogue.

WINFLEX T / TL NPE

  • Nominal torque: 90 to 12 500 Nm

  • Bore: 28 to 130 mm

  • with adaptor

WINFLEX TDF

  • with brake disc Patent D I 21.53-200-3

WINFLEX DG

  • Nenndrehmoment: 52 bis 186 000 Nm

  • Bohrung: 28 bis 360 mm

  • Konische Gittergestaltung vorgesehen:
    Hohe Drehmomentkapazität - Kompaktes Design - Einfache Montage.

  • Ganzmetallkonstruktion mit minimalen Abmessungen und daraus resultierenden Gewichts- und Trägheitsvorteilen.

  • Gitter: Chrom-Vanadium-Stell, wärmebehandelt, um maximale Festigkeit und Härte zu erreichen.

  • Drehscheibe: Geschmiedeter Stahl präzise bearbeitet

  • Deckung: Schwerer Stahl Typ "V" - verzinkt. "H"-Typ Aluminiumlegierung

  • Siegel: Haltbares synthetisches Material.

  • Torsionsflexibel

  • Beherbergt: Parallel-, Winkel- und Axialverschiebungen.

  • Belastbar

  • Installation: Das Design sieht eine Trennung der Verbindung ohne Ausbau des Laufwerks vor.

Please click here to open our WINFLEX DG catalogue.

WINFLEX 9000

  • Nominal torque: 950 to 26 500 Nm

  • Bore: up to 380 mm

  • Increase in drilling capacity

  • horizontal, two-part aluminium housing for easy mounting

  • better gradation of the range

Please click here to open our WINFLEX 9000 catalogue.

WINFLEX S

  • Nominal torque: 270 000 to 800 000 Nm

  • Bore: 270 to 390 mm

  • heavy version

WINFLEX CPF

  • Nominal torque: 950 to 48 000 Nm

  • Drill hole: 55 to 230 mm

  • with drum brake

  • LinkedIn Social Icon
  • Youtube
  • Facebook Social Icon